New Mexico Administrative Code
Title 12 - TRADE, COMMERCE AND BANKING
Chapter 8 - TRADE PRACTICES AND REGULATIONS
Part 2 - MINIMUM STANDARDS FOR SURVEYING IN NEW MEXICO
Section 12.8.2.8 - REQUIREMENTS

Universal Citation: 12 NM Admin Code 12.8.2.8
Current through Register Vol. 35, No. 18, September 24, 2024

Whenever a professional surveyor or a professional engineer undertakes any surveying as authorized in the Engineering and Surveying Practice Act, the licensee shall determine which type of surveying activity is being conducted from the definitions in Subsection A of 12. 8.2.7 NMAC shall then conform to the requirements set forth in 12.8.2.9 NMAC through 12.8.2.14 NMAC for that type of surveying and must also comply with accuracy standards in 12.8.2.16 NMAC when applicable. If the surveying is not defined, then the surveyor shall conform to the requirements for unclassified surveying set forth in 12.8.2.15 NMAC.

Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.