New Mexico Administrative Code
Title 10 - PUBLIC SAFETY AND LAW ENFORCEMENT
Chapter 25 - STATE FIRE MARSHAL
Part 2 - CERTIFICATES OF FITNESS
Section 10.25.2.9 - APPLICATION PROCEDURE
Universal Citation: 10 NM Admin Code 10.25.2.9
Current through Register Vol. 35, No. 18, September 24, 2024
Any person may apply for a certificate of fitness by submitting the required application to the fire marshal as provided in 10.25.1.9 NMAC or to an AHJ. The mandatory applications described in 10.25.1.9 NMAC are available as indicated in 10.25.1.9 NMAC.
A. Information required for initial application. Each application for a certificate of fitness shall include:
(1) the applicant's name, mailing
address, telephone number and signature of authorized representative;
(2) the disciplines for which certification
is requested, listed in
10.25.2.8 NMAC;
(3) a statement that the applicant agrees to
be inspected by the fire marshal, his designees or an AHJ at any time during
normal business hours;
(4) for
certification for automatic fire suppression systems and fire pumps: the name
of the qualified party, the type and number of his CID license and a copy of
his license;
(5) for certification
for automatic fire detection and alarm systems: the name of the qualified
party, the type and number of his CID license and a copy of his
license;
(6) for certification for
chemical fire suppression systems: the name of the qualified party, the type
and number of his CID license and a copy of his license;
(7) for certification for portable fire
extinguishers, a statement indicating that the applicant:
(a) operates from a fixed location, provides
mobile recharging service, or both;
(b) agrees to allow only trained personnel to
maintain, service and recharge portable fire extinguishers; and
(c) agrees to provide its personnel with all
service manuals and documentation, proper tools, recharging materials,
lubricants and manufacturers' recommended replacement parts or parts
specifically listed for use in fire extinguishers.
(8) for certification to inspect and test
fire and smoke dampers, an application shall include:
(a) for mechanically actuated fire and smoke
dampers, applicants shall provide documentation of a valid NFPA-Certified Fire
Protection Specialist certification or of an approved fire and life safety
certification from a program accredited by the American National Standards
Institute (ANSI).
(b) for
electrically actuated fire and smoke dampers monitored by a fire alarm system,
applicants shall comply with requirements of Paragraph (5) of Subsection A of
10.25.2.9 NMAC.
(c) for fire and smoke dampers with both
mechanical and electrical components, the applicant inspecting the mechanical
components shall provide documentation pursuant to subparagraph (a) of this
paragraph and the applicant inspecting the electrical components shall provide
documentation pursuant to subparagraph (b) of this
paragraph.
B. Requirements for renewal. Any person seeking to renew a certificate of fitness shall apply following the process provided, and submit all information required, for an initial application.
Disclaimer: These regulations may not be the most recent version. New Mexico may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
