New Jersey Administrative Code
Title 9A - HIGHER EDUCATION
Chapter 6 - USE OF DESIGN-BUILD PROJECT DELIVERY FOR CONSTRUCTION PROJECTS
Subchapter 1 - USE OF DESIGN-BUILD PROJECT DELIVERY FOR CONSTRUCTION PROJECTS
Section 9A:6-1.3 - Authorization to commence design-build process

Universal Citation: NJ Admin Code 9A:6-1.3

Current through Register Vol. 56, No. 6, March 18, 2024

(a) For a construction project that can be reasonably, and in good faith, estimated to have a cost equal to or exceeding $ 5,000,000, the governing body of a contracting unit may adopt a resolution to authorize utilization of design-build project delivery in lieu of a design-bid-build delivery system. In its authorization to commence the design-build process, the contracting unit must determine that, when compared to the design-bid-build process, design-build project delivery will facilitate a shorter overall design and construction process including, but not limited to, reducing the likelihood of work stoppages and change orders that would increase project costs. A contracting unit cannot use design-build project delivery for projects that can be reasonably, and in good faith, estimated to have a cost below $ 5,000,000.

(b) For purposes of meeting the minimum monetary threshold at (a) above, a contracting unit may group more than one project together, so long as those projects are part of the same work.

(c) The resolution adopted pursuant to (a) above shall also establish procedures for the solicitation and award of the design-build contract that are consistent with this chapter.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.