New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTION
Chapter 9E - PRIVATE WELL TESTING ACT RULES
Subchapter 3 - REPORTING AND DATA VALIDITY
Section 7:9E-3.1 - Reporting requirements for laboratories
Universal Citation: NJ Admin Code 7:9E-3.1
Current through Register Vol. 56, No. 24, December 18, 2024
(a) The reporting laboratory shall, subject to (c) below, within five business days after completion of analyses of water samples:
1. Provide the following information to the
person(s) who requested the test. The information shall be provided on the
Department's "Private Well Water Test Reporting Form", which is available by
logging on to the Department's website at www.state.nj.us/dep/pwta; or by
contacting the Department's Hotline for Private Well Testing Act Program
Hotline. The form shall include the following information:
i. The name, telephone number and mailing
address of person(s) who requested the test;
ii. The name of the laboratory employee or
name of authorized representative(s) of the laboratory who collected the water
sample;
iii. The analytical method
used for each parameter tested pursuant to this chapter;
iv. The analytical results for each parameter
tested pursuant to this chapter:
(1) The
Department's "Private Well Water Test Reporting Form" shall include the maximum
contaminant level (MCL), applicable water quality standard, or action level for
each parameter as set forth at
N.J.A.C.
7:10-5.1, 5.2 and 7:10-7.2. The information
required at (a)1iv above, shall be inserted in the space provided on the
Department's form next to the applicable standard for that parameter;
v. A statement indicating that the
testing was performed for the purpose of complying with the Private Well
Testing Act and N.J.A.C. 7:9E;
vi.
The location of the real property, including, block and lot, street address,
municipality, municipal code, and county;
vii. The date and time of collection of the
water sample(s);
viii. The specific
point at which the water sample was collected (for example, kitchen tap,
bathroom tap, etc.);
ix. If known,
the type of installed water treatment device and condition of water treatment
device;
x. The date and time that
the water sample(s) was analyzed by the certified environmental
laboratory;
xi. The Global
Positioning System (GPS) location of the well head or front door of the subject
property, or if GPS coordinates cannot be collected at one of those locations,
at another location on the subject property, as close as possible to the well
head or front door. GPS data shall be obtained in accordance with Department
standards, N.J.A.C. 7:1D, Appendix A, and shall include a notation of which
location was utilized;
xii. The
State of New Jersey well permit or well record number (if known);
xiii. The name and identification number of
all New Jersey certified laboratories which conducted the analyses in
accordance with N.J.A.C. 7:18;
xiv.
The certified environmental laboratory sample identification number;
xv. A statement of available remediation
funding alternatives;
xvi. A
written certification signed by the laboratory manager and/or designee stating
that all sampling, analyses and reporting performed by that laboratory comply
with all requirements as set forth in this chapter and in Regulations Governing
the Certification of Laboratories and Environmental Measurements, N.J.A.C.
7:18, and certifying that the laboratory is in compliance with all laboratory
certification and quality control procedures and requirements as set forth in
N.J.A.C. 7:18;
(1) The certification
requirement in (a)1xvi above shall also apply to certified laboratories that
are subcontracted to perform analytical testing pursuant to this chapter.
Subcontracted laboratories shall provide the certification in writing to the
reporting laboratory at the time that the results are submitted;
xvii. A statement providing that
additional information may be obtained by logging onto the NJDEP-Private Well
Testing Act website at www.state.nj.us/dep/pwta; or contacting
the Department's Bureau of Safe Drinking Water at 609-292-5550;
xviii. One or more of the following
statement(s), as applicable, at the top of the form prior to listing the
individual results as follows:
(1) If all
analytical results meet applicable standards, the statement shall say:
"Analytical results meet primary and secondary contaminant standards for
drinking water.";
(2) If one or
more of the analytical results fail to meet applicable standards, the statement
shall say: "One or more of the analytical results do not meet primary
contaminant standards for drinking water.";
(3) If one or more of the analytical results
fail to meet applicable standards, the statement shall say: "One or more of the
analytical results do not meet secondary contaminant standards for drinking
water."; and
xix. Any
other information set forth in the Regulations Governing the Certification of
Laboratories and Environmental Measurements at
N.J.A.C.
7:18-9.4(b)9; and
2. Provide the following
information to the Department electronically in accordance with
N.J.A.C.
7:9E-3.2:
i. The name and address of the reporting
laboratory;
ii. All data being
submitted to the person(s) who requested the test pursuant to (a)1i through xiv
above;
iii. The data package
submission number;
iv. The unique
laboratory submission identification number;
v. The CAS number of each parameter analyzed,
if applicable;
vi. A detection flag
for each parameter;
vii. The method
detection limit(s), and dilution factor(s) if applicable;
viii. The method detection concentration (for
gross alpha particle activity);
ix.
The first count of gross alpha particle activity (if applicable);
x. The second count of gross alpha particle
activity, if warranted and if applicable;
xi. The uncertainty value (of gross alpha
analysis);
xii. The units of
measure for each parameter;
xiii.
The completion date of analyses;
xiv. The well driller name, if
known;
xv. The well installation
date, if known; and
xvi. A
description of lead sample collection technique.
(b) If more than one certified laboratory analyzes water samples subject to this chapter, one certified laboratory shall act as the reporting laboratory and shall provide a complete set of required information to the Department as described in (a)2 above.
(c) Analysis shall be deemed complete once all the required analytical tests have been submitted by the laboratories to the reporting laboratory.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.