New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTION
Chapter 28 - RADIATION PROTECTION PROGRAMS
Subchapter 20 - PARTICLE ACCELERATORS FOR INDUSTRIAL AND RESEARCH USE
Section 7:28-20.7 - Shielding design and radiation area survey requirements for a particle accelerator

Universal Citation: NJ Admin Code 7:28-20.7

Current through Register Vol. 56, No. 24, December 18, 2024

(a) A person shall consult with an individual with qualifications equivalent to those specified in N.J.A.C. 7:28-20.4(e) with respect to the health physics considerations in the design of a particle accelerator installation. The original record of this consultation, including the shielding design, shall be maintained at the particle accelerator facility for the life of the unit and shall be produced for review by the Department during an inspection and a copy submitted to the Department along with the registration form. This section shall apply to those particle accelerators planned for installation after February 3, 1992.

(b) A registrant shall not install a particle accelerator unless such unit is designed and constructed with primary and/or secondary protective barriers as are necessary to comply with the permissible dose rates, radiation levels and concentrations specified in N.J.A.C. 7:28-6.

(c) A registrant shall ensure that a radiation survey of controlled areas and of adjacent areas is performed by the PASO or by a qualified individual under the supervision of the PASO to ensure that radiation exposure of individuals conforms to the requirements of N.J.A.C. 7:28-6, and an inspection is performed of the health physics aspects of the facility when the particle accelerator is first capable of producing radiation, but before the particle accelerator is used for any purpose other than installation or assembly of the particle accelerator, or the conducting of radiation surveys and health physics inspections.

(d) The registrant shall ensure that a written report of the radiation survey and health physics inspection is prepared by the PASO or by a qualified individual under the supervision of the PASO for review by the registrant. The registrant shall maintain these reports for the duration of the life of the machine at the particle accelerator facility.

(e) Prior to operation of the particle accelerator, the registrant shall implement or cause to be implemented the recommendations listed in the radiation survey and health physics report, including any special limitations which are necessary to comply with the requirements of this chapter. The registrant shall ensure that a follow-up radiation area survey of controlled areas and of adjacent areas is performed by the PASO or by a qualified individual under the supervision of the PASO and a follow-up health physics inspection is conducted to ensure that the recommendations as implemented meet the requirements of this chapter. The registrant shall ensure that a written report of the follow-up radiation survey and the follow-up health physics inspection is prepared by the PASO or under the supervision of the PASO for review by the registrant.

(f) The registrant shall submit a copy of the radiation survey and health physics inspection report required by (d) and (e) above to the Department within 30 days of the date of the survey and health physics inspection report, and shall maintain the original radiation survey and health physics inspection report for the duration of the life of the machine at the particle accelerator facility. The radiation survey and health physics inspection reports shall be produced for review by the Department upon request.

(g) The requirements of (c) above shall be followed when changes have been made in shielding, operation, equipment, or occupancy of adjacent areas which could affect radiation exposure of any individual and at intervals not to exceed one year.

(h) The registrant shall maintain at least two radiation survey instruments suitable for measuring all levels and energies of radiation capable of being produced by the particle accelerator. At least one of these radiation survey instruments shall be calibrated, operable, and easily accessible at the facility for use at all times.

(i) A registrant shall not use or cause a radiation survey instrument to be used unless:

1. A performance test is conducted on the survey instrument prior to each day's use;

2. The survey instrument is calibrated at intervals not exceeding one year using a nationally recognized calibration criteria;

3. The survey instrument is recalibrated each time it is serviced or repaired. If the service involved only a battery replacement, the survey instrument does not have to be recalibrated; and

4. The calibration procedure has been performed by a qualified individual using nationally recognized calibration procedures which conform to those of the National Institute of Standards and Technology. These procedures shall identify the calibration source used. Results of each calibration of the survey instrument shall be maintained at the particle accelerator facility for five years. The record of these results shall be produced for review by the Department during an inspection and shall be submitted to the Department upon request.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.