New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTION
Chapter 27B - SAMPLING AND ANALYTICAL PROCEDURES
Subchapter 1 - SAMPLING AND ANALYTICAL PROCEDURES FOR DETERMINING EMISSIONS OF PARTICLES FROM MANUFACTURING PROCESSES AND FROM COMBUSTION OF FUELS
Section 7:27B-1.4 - Sampling facilities to be provided by the person responsible for emissions

Universal Citation: NJ Admin Code 7:27B-1.4

Current through Register Vol. 56, No. 18, September 16, 2024

(a) The owner or operator of the source operation to be tested shall be responsible for providing the following testing facilities upon request by the bureau:

1. Sampling ports installed at locations specified by the bureau and of a size large enough to accommodate the sampling equipment;

2. Safe sampling platform(s) and safe access thereto conforming with laws and regulations concerning safe construction and safe practice (Reference 1);

3. Utilities as needed for sampling and testing equipment. This may include electrical power and water;

4. Any other facilities exclusive of instrumentation and sensing devices as may be necessary for the bureau to accurately determine the emission of particles from the source operation;

5. Facilities as necessary for representative sampling of fuel and determination of the amount being burned during the test run;

6. The facilities installed may be either permanent or temporary, at the discretion of the person responsible for their provision.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.