New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTION
Chapter 26A - RECYCLING RULES
Subchapter 6 - STANDARDS FOR THE MANAGEMENT OF USED OIL
Section 7:26A-6.7 - Standards for used oil processors and re-refiners

Universal Citation: NJ Admin Code 7:26A-6.7

Current through Register Vol. 56, No. 6, March 18, 2024

(a) Standards for used oil processors and re-refiners and used oil processing and re-refining facilities are as follows:

1. The requirements of this section apply to owners and operators of facilities that process used oil. Processing means chemical or physical operations designed to produce from used oil, or to make used oil more amenable for production of, fuel oils, lubricants, or other used oil-derived products. Processing includes, but is not limited to: blending used oil with virgin petroleum products, blending used oils to meet the fuel specification, filtration, simple distillation, chemical or physical separation and re-refining. The requirements of this section do not apply to:
i. Transporters that conduct incidental processing operations that occur during the normal course of transportation as provided in 7:26A-6.6(b); or

ii. Burners that conduct incidental processing operations that occur during the normal course of used oil management prior to burning as provided in (b) below.

2. Used oil processors/re-refiners who conduct the following activities are also subject to the requirements of other applicable provisions of this subchapter as indicated in (a)2i through vi below;
i. Processors/re-refiners who generate used oil shall also comply with 7:26A-6.4;

ii. Processors/re-refiners who transport used oil shall also comply with N.J.A.C. 7:26A-6.6;

iii. Except as provided in (a)2iii(1) below, processors/re-refiners who burn off-specification used oil for energy recovery shall also comply with 7:26A-6.8. Processor/re-refiners burning used oil for energy recovery under the following conditions are not subject to N.J.A.C. 7:26A-6.8:
(1) The used oil is burned for purposes of processing used oil, which is considered burning incidentally to used oil processing;

iv. Processors/re-refiners who direct shipments of off-specification used oil from their facility to a used oil burner or first claim that used oil that is to be burned for energy recovery meets the used oil fuel specifications set forth in 7:26A-6.2 shall also comply with N.J.A.C. 7:26A-6.8; and

v. Processors/re-refiners who dispose of used oil also shall comply with 7:26A-6.9;

vi. Processors/re-refiners shall comply with the requirements for a Class D recycling facility of this chapter (including the requirement to obtain a Class D recycling center approval pursuant to N.J.A.C. 7:26A-3 ) and all applicable requirements of N.J.A.C. 7:27 and the regulations promulgated pursuant to the Federal Clean Air Act.

(b) The standards for notification for used oil processors and re-refiners are as follows:

1. Used oil processors and re-refiners shall comply with these requirements and obtain an EPA identification number unless they have already notified the USEPA of their hazardous waste activities in accordance with the requirements of RCRA section 3010;

2. A used oil processor or re-refiner who has not received an EPA identification number may obtain one by notifying the Regional Administrator of USEPA Region II of their used oil activity by submitting either:
i. A completed EPA Form 8700-12 (To obtain EPA Form 8700-12 call RCRA/Superfund Hotline at 1-800-424-9346 or 703-920-9810); or

ii. A letter requesting an EPA identification number. Call the RCRA/Superfund Hotline to determine where to send a letter requesting an EPA identification number. The letter should include the following:
(1) The processor or re-refiner company name;

(2) The owner of the processor or re-refiner company;

(3) The mailing address for the processor or re-refiner;

(4) The name and telephone number for the processor or re-refiner point of contact;

(5) The type of used oil activity (that is, process only, process and re-refine); and

(6) The location of the processor or re-refiner facility.

(c) General facility standards for used oil at processing facilities and re-refining facilities are as follows:

1. Owners and operators of used oil processing and re-refining facilities shall comply with the following preparedness and prevention requirements:
i. Facilities shall be maintained and operated to minimize the possibility of a fire, explosion, or any unplanned sudden or non-sudden release of used oil to air, soil, or surface water which could threaten human health or the environment;

ii. All facilities shall be equipped with the following, unless none of the hazards posed by used oil handled at the facility could require a particular kind of equipment specified in (c)1ii(1) through (4) below:
(1) An internal communications or alarm system capable of providing immediate emergency instruction (voice or signal) to facility personnel;

(2) A device, such as a telephone (immediately available at the scene of operations) or a hand-held two-way radio, capable of summoning emergency assistance from local police departments, fire departments, or State or local emergency response teams;

(3) Portable fire extinguishers, fire control equipment (including special extinguishing equipment, such as that using foam, inert gas, or dry chemicals), spill control equipment and decontamination equipment; and

(4) Water at adequate volume and pressure to supply water hose streams, or foam producing equipment, or automatic sprinklers, or water spray systems;

iii. All facility communications or alarm systems, fire protection equipment, spill control equipment, and decontamination equipment, where required, shall be tested and maintained as necessary to assure its proper operation in time of emergency;

iv. Standards for access to communications or alarm system are as follows:
(1) Whenever used oil is being poured, mixed, spread, or otherwise handled, all personnel involved in the operation shall have immediate access to an internal alarm or emergency communication device, either directly or through visual or voice contact with another employee, unless such a device is not required pursuant to (c)1ii above;

(2) If there is ever just one employee on the premises while the facility is operating, the employee shall have immediate access to a device, such as a telephone (immediately available at the scene of operation) or a hand-held two-way radio, capable of summoning external emergency assistance, unless such a device is not required pursuant to (c)1ii above;

v. The owner or operator shall maintain aisle space to allow the unobstructed movement of personnel, fire protection equipment, spill control equipment, and decontamination equipment to any area of facility operation in an emergency, unless aisle space is not needed for any of these purposes; and

vi. Standards for arrangements with local authorities are as follows:
(1) The owner or operator shall make the following arrangements, as appropriate for the type of used oil handled at the facility and the potential need for the services of these organizations:
(A) Arrangements to familiarize police, fire departments, and emergency response teams with the layout of the facility, properties of used oil handled at the facility and associated hazards, places where facility personnel would normally be working, entrances to roads inside the facility, and possible evacuation routes;

(B) Where more than one police and fire department might respond to an emergency, agreements designating primary emergency authority to a specific police and a specific fire department, and agreements with any others to provide support to the primary emergency authority;

(C) Agreements with State emergency response teams, emergency response contractors, and equipment suppliers; and

(D) Arrangements to familiarize local hospitals with the properties of used oil handled at the facility and the types of injuries or illnesses which could result from fires, explosions, or releases at the facility; and

(2) Where State or local authorities decline to enter into such arrangements, the owner or operator shall document the refusal in the operating record; and

2. Owners and operators of used oil processing and re-refining facilities shall comply with the following contingency plan and emergency procedure requirements:
i. The purpose and implementation of the contingency plan is as follows:
(1) Each owner or operator shall have a contingency plan for the facility. The contingency plan shall be designed to minimize hazards to human health or the environment from fires, explosions, or any unplanned sudden or non-sudden release of used oil to air, soil, or surface water.

(2) The provisions of the plan shall be carried out immediately whenever there is a fire, explosion, or release or used oil which could threaten human health or the environment;

ii. The following are the minimum contents of the contingency plan:
(1) The contingency plan shall describe the actions facility personnel shall take to comply with (c)2i and 2vi above in response to fires, explosions, or any unplanned sudden or non-sudden release of used oil to air, soil, or surface water at the facility;

(2) If the owner or operator has already prepared a Spill Prevention, Control, and Countermeasures (SPCC) Plan in accordance with 40 C.F.R. Part 112, or 40 C.F.R. Part 1510, or a Discharge Prevention, Containment and Countermeasure (DPCC) Plan per N.J.A.C. 7:1E, the owner or operator need only amend that plan to incorporate used oil management provisions that are sufficient to comply with the requirements of this section;

(3) The plan shall describe arrangements agreed to by local police departments, fire departments, hospitals, contractors, and State and local emergency response teams to coordinate emergency services, pursuant to (c)1vi above;

(4) The plan shall list names, addresses, and phone numbers (office and home) of all persons qualified to act as emergency coordinator (see (c)2v below), and this list shall be kept up to date. Where more than one person is listed, one shall be named as primary emergency coordinator and others shall be listed in the order in which they will assume responsibility as alternates;

(5) The plan shall include a list of all emergency equipment at the facility (such as fire extinguishing systems, spill control equipment, communications and alarm systems (internal and external), and decontamination equipment), where this equipment is required. This list shall be kept up to date. In addition, the plan shall include the location and a physical description of each item on the list, and a brief outline of its capabilities;

(6) The plan shall include an evacuation plan for facility personnel where there is a possibility that evacuation could be necessary. This plan shall describe signal(s) to be used to begin evacuation, evacuation routes, and alternate evacuation routes (in cases where the primary routes could be blocked by releases of used oil or fires);

iii. A copy of the contingency plan and all revisions to the plan shall be:
(1) Maintained at the facility; and

(2) Submitted to all local police departments, fire departments, hospitals, and State and local emergency response teams that may be called upon to provide emergency services;

iv. The contingency plan shall be reviewed, and immediately amended, if necessary, whenever:
(1) Applicable regulations are revised;

(2) The plan fails in an emergency;

(3) The facility changes-in its design, construction, operation, maintenance, or other circumstances-in a way that materially increases the potential for fires, explosions, or releases of used oil, or changes the response necessary in an emergency;

(4) The list of emergency coordinators changes; or

(5) The list of emergency equipment changes;

v. At all times, there shall be at least one employee either on the facility premises or on call (that is, available to respond to an emergency by reaching the facility within a short period of time) with the responsibility for coordinating all emergency response measures. This emergency coordinator shall be thoroughly familiar with all aspects of the facility's contingency plan, all operations and activities at the facility, the location and characteristic of used oil handled, the location of all records within the facility, and facility layout. In addition, this person shall have the authority to commit the resources needed to carry out the contingency plan. The emergency coordinator's responsibilities are more fully spelled out in (c)2vi below. Applicable responsibilities for the emergency coordinator vary, depending on factors such as type and variety of used oil handled by the facility, and type and complexity of the facility; and

vi. The following are the emergency procedures to be implemented in an emergency situation:
(1) Whenever there is an imminent or actual emergency situation, the emergency coordinator (or the designee when the emergency coordinator is on call) shall immediately:
(A) Activate internal facility alarms or communication systems, where applicable, to notify all facility personnel; and

(B) Notify appropriate State or local agencies with designated response roles if their help is needed;

(2) Whenever there is a release, fire, or explosion, the emergency coordinator shall immediately identify the character, exact source, amount, and a real extent of any released materials. The emergency coordinator may do this by observation or review of facility records or shipping papers and, if necessary, by chemical analysis;

(3) Concurrently, the emergency coordinator shall assess possible hazards to human health or the environment that may result from the release, fire, or explosion. This assessment shall consider both direct and indirect effects of the release, fire, or explosion (for example, the effects of any toxic, irritating, or asphyxiating gases that are generated, or the effects of any hazardous surface water run-offs from water of chemical agents used to control fire and heat-induced explosions);

(4) If the emergency coordinator determines that the facility has had a release, fire, or explosion which could threaten human health, or the environment, outside the facility, the emergency coordinator shall report his findings as follows:
(A) If the emergency coordinator's assessment indicated that evacuation of local areas may be advisable, the emergency coordinator shall immediately notify appropriate local authorities and shall be available to help appropriate officials decide whether local areas should be evacuated; and

(B) The emergency coordinator shall immediately notify either the government official designated as the on-scene coordinator for the geographical area (in the applicable regional contingency plan under 40 C.F.R. part 1510 ), or the National Response Center (using their 24-hour toll free number 800/424-8802). The report shall include:
(I) The name and telephone number of reporter;

(II) The name and address of facility;

(III) The time and type of incident (for example, release, fire);

(IV) The name and quantity of material(s) involved, to the extent known;

(V) The extent of injuries, if any; and

(VI) The possible hazards to human health, or the environment, outside the facility;

(5) During an emergency, the emergency coordinator shall take all reasonable measures necessary to ensure that fires, explosions, and releases do not occur, recur, or spread to other used oil or hazardous waste at the facility. These measures shall include, where applicable, stopping processes and operation, collecting and containing released used oil, and removing or isolating containers;

(6) If the facility stops operation in response to a fire, explosion, or release, the emergency coordinator shall monitor for leaks, pressure buildup, gas generation, or ruptures in valves, pipes, or other equipment, wherever this is appropriate;

(7) Immediately after an emergency, the emergency coordinator shall provide for recycling, storing, or disposing of recovered used oil, contaminated soil or surface water, or any other material that results from a release, fire, or explosion at the facility;

(8) The emergency coordinator shall ensure that, in the affected area(s) of the facility:
(A) No waste or used oil that may be incompatible with the released material is recycled, treated, stored, or disposed of until cleanup procedures are completed; and

(B) All emergency equipment listed in the contingency plan is cleaned and fit for its intended use before operations are resumed; and

(C) The owner or operator shall notify the Regional Administrator, and appropriate State and local authorities that the facility is in compliance with (c)2vi(8)(A) and (B) above, before operations are resumed in the affected area(s) of the facility; and

(9) The owner or operator shall note in the operating record the time, date and details of any incident that requires implementing the contingency plan. Within 15 days after the incident, he or she shall submit a written report on the incident to the Regional Administrator. The report shall include:
(A) The name, address, and telephone number of the owner or operator;

(B) The name, address, and telephone number of the facility;

(C) The date, time, and type of incident (for example, fire, explosion);

(D) The name and quantity of material(s) involved;

(E) The extent of injuries, if any;

(F) An assessment of actual or potential hazards to human health or the environment, where this is applicable; and

(G) The estimated quantity and disposition of recovered material that resulted from the incident.

(d) The standards for rebuttable presumption for used oil processors and re-refiners are as follows:

1. To ensure that used oil managed at a processing/re-refining facility is not hazardous waste under the rebuttable presumption of 7:26A-6.1(a)2 i(2), the owner or operator of a used oil processing/re-refining facility shall determine whether the total halogen content of used oil managed at the facility is above or below 1,000 ppm;

2. The owner or operator shall make this determination by:
i. Testing the used oil; or

ii. Applying knowledge of the halogen content of the used oil in light of the materials or processes used;

3. If the used oil contains greater than or equal to 1,000 ppm total halogens, it is presumed to be a hazardous waste because it has been mixed with halogenated hazardous waste listed in 40 C.F.R. Parts 261.31, 261.32, and 261.33 as incorporated by reference at N.J.A.C. 7:26G-5. The owner or operator may rebut the presumption, except as set forth in (d)3i and ii below, by demonstrating that the used oil does not contain hazardous waste (for example, by using an analytical method from SW-846, Edition III, to show that the used oil does not contain significant concentrations of halogenated hazardous constituents listed in Appendix VIII of 40 C.F.R. Part 261, as incorporated by reference at N.J.A.C. 7:26G-5.
i. The rebuttable presumption does not apply to metalworking oils/fluids containing chlorinated paraffins, if they are processed, through a tolling agreement, to reclaim metalworking oils/fluids. The presumption does apply to metalworking oils/fluids if such oils/fluids are recycled in any other manner, or disposed; or

ii. The rebuttable presumption does not apply to used oils contaminated with chlorofluorocarbons (CFCs) removed from refrigeration units where the CFCs are destined for reclamation. The rebuttable presumption does apply to used oils contaminated with CFCs that have been mixed with used oil from sources other than refrigeration units; and

4. If rebuttal is unsuccessful, hazardous waste shall be shipped off-site by a licensed New Jersey hazardous waste transporter as required by 40 C.F.R. 262.34, as incorporated by reference at N.J.A.C. 7:26G-6.

(e) The used oil management standards for used oil processors and re-refiners are as follows:

1. Used oil processor/re-refiners are subject to all applicable Spill Prevention, Control and Countermeasures ( 40 C.F.R. Part 112 ) and N.J.A.C. 7:1E in addition to the requirements of this section. Used oil processors/re-refiners are also subject to the Underground Storage Tank ( 40 C.F.R. Part 280 and N.J.A.C. 7:14B) standards for used oil stored in underground tanks whether or not the used oil exhibits any characteristics of hazardous waste, in addition to the requirements of this section as follows:

2. Used oil processors/re-refiners shall not store used oil in units other than tanks, containers, or units subject to regulation under 40 C.F.R. Parts 264 or 265, as incorporated by reference at N.J.A.C. 7:26G-8 or 9;

3. Containers and aboveground tanks used to store or process used oil at processing and re-refining facilities shall be:
i. In good condition (no severe rusting, apparent structural defects or deterioration); and

ii. Not leaking (no visible leaks);

4. Containers used to store or process used oil at processing and re-refining facilities shall be equipped with a secondary containment system meeting the following:
i. The secondary containment system shall consist of, at a minimum:
(1) Dikes, berms or retaining walls; and

(2) The floor shall cover the entire area within the dike, berm, or retaining wall; or

(3) An equivalent secondary containment system; and

ii. The entire containment system, including walls and floor, shall be sufficiently impervious to used oil to prevent any used oil released into the containment system from migrating out of the system to the soil, groundwater, or surface water;

5. Existing aboveground tanks used to store or process used oil at processing and re-refining facilities shall be equipped with a secondary containment system meeting the following:
i. The secondary containment system shall consist of, at a minimum:
(1) Dikes, berms or retaining walls; and

(2) The floor shall cover the entire area within the dike, berm, or retaining wall except areas where existing portions of the tank meet the ground; or

(3) An equivalent secondary containment system; and

ii. The entire containment system, including walls and floor, shall be sufficiently impervious to used oil to prevent any used oil released into the containment system from migrating out of the system to the soil, groundwater, or surface water;

6. New aboveground tanks used to store or process used oil at processing and re-refining facilities shall be equipped with a secondary containment system meeting the following:
i. The secondary containment system shall consist of, at a minimum:
(1) Dikes, berms or retaining walls; and

(2) The floor shall cover the entire area within the dike, berm, or retaining wall; or

(3) An equivalent secondary containment system; and

ii. The entire containment system, including walls and floor, shall be sufficiently impervious to used oil to prevent any used oil released into the containment system from migrating out of the system to the soil, groundwater, or surface water;

7. The following are the label standards for used oil transfer facilities:
i. Containers and aboveground tanks used to store or process used oil at processing and re-refining facilities shall be labeled or marked clearly with the words "Used Oil"; and

ii. Fill pipes used to transfer used oil into underground storage tanks at processing and re-refining facilities shall be labeled or marked clearly with the words "Used Oil";

8. Upon detection of a release of used oil to the environment not subject to the requirements of 40 C.F.R. Part 280, subpart F or N.J.A.C. 7:14B, an owner/operator shall perform the following cleanup steps:
i. Stop the release;

ii. Contain the released used oil;

iii. Clean up and manage properly the released used oil and other materials; and

iv. If necessary, repair or replace any leaking used oil storage containers or tanks prior to returning them to service; and

9. The closure standards for used oil processors and re-refiners are as follows:
i. Owners and operators who store or process used oil in aboveground tanks shall comply with the following requirements:
(1) At closure of a tank system, the owner or operator shall remove or decontaminate used oil residues in tanks, contaminated containment system components, contaminated soils, and structures and equipment contaminated with used oil, and manage them as hazardous waste, unless the materials are not hazardous waste under 40 C.F.R. Parts 260 through 266, 268, 270 and 124, as incorporated by reference at N.J.A.C. 7:26G; and

(2) If the owner or operator demonstrates that not all contaminated soils can be practicably removed or decontaminated as required in 8i(1) above, then the owner or operator shall close the tank system and perform post-closure care in accordance with the closure and post-closure care requirements that apply to hazardous waste landfills found at 40 C.F.R. 265.310, as incorporated by reference at N.J.A.C. 7:26G-9.

ii. Owners and operators who store used oil in containers shall comply with the following requirements:
(1) At closure, containers holding used oils or residues of used oil shall be removed from the site; and

(2) The owner or operator shall remove or decontaminate used oil residues, contaminated containment system components, contaminated soils, and structures and equipment contaminated with used oil, and manage them as hazardous waste, unless the materials are not hazardous waste under 40 C.F.R. Part 261, as incorporated by reference at N.J.A.C. 7:26G-5.

(f) The following are the analysis plan standards for used oil processors and re-refiners:

1. Owners or operators of used oil processing and re-refining facilities shall develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of 7:26A-6.7(d) and, if applicable, 7:26A-6.9(c). The owner or operator shall keep the plan at the facility as provided in (f)2 and 3 below.

2. At a minimum, where the owner or operators is making a rebuttable presumption for used oil in 7:26A-6.7(d), the plan shall specify the following:
i. Whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination,

ii. If sample analyses are used to make this determination, the plan shall contain the following:
(1) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using one of the sampling methods in Appendix I of 40 C.F.R. Part 261, as incorporated by reference at N.J.A.C. 7:26G-5 as follows:
(A) One of the sampling methods in Appendix I of 40 C.F.R. Part 261, as incorporated by reference at N.J.A.C. 7:26G-5; or

(B) A method shown to be equivalent under 40 C.F.R. 260.2 and 260.21, as incorporated by reference at N.J.A.C. 7:26G-4;

(2) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(3) The methods used to analyze used oil for the parameters specified in 7:26A-6.7(d); and

iii. The type of information that will be used to determine the halogen content of the used oil; and

3. At a minimum, the plan shall specify the following if 7:26A-6.8 (d) is applicable:
i. Whether sample analyses or other information will be used to make this determination;

ii. If sample analyses are used to make this determination, the plan shall contain the following:
(1) The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:
(A) One of the sampling methods in Appendix I of 40 C.F.R. Part 261, as incorporated by reference at N.J.A.C. 7:26G-5; or

(B) A method shown to be equivalent under N.J.A.C. 7:26G-4;

(2) Whether used oil will be sampled and analyzed prior to or after any processing/re-refining;

(3) The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and

(4) The methods used to analyze used oil for the parameters specified in 7:26A-6.8 (d); and

iii. The type of information that will be used to make the on-specification used oil fuel determination.

(g) The used oil tracking standards for used oil processors and re-refiners are as follows:

1. Used oil processors/re-refiners shall keep a record of each used oil shipment accepted for processing/re-refining. These records may take the form of a log, invoice, manifest, bill of lading or other shipping documents. Records for each shipment shall include the following information:
i. The name and address of the transporter who delivered the used oil to the processor/re-refiner;

ii. The name and address of the generator or processor/re-refining from whom the used oil was sent for processing/re-refining;

iii. The EPA identification number of the transporter who delivered the used oil to the processor/re-refiner;

iv. The EPA identification number (if applicable) of the generator or processor/re-refiner from whom the used oil was sent for processing/re-refining;

v. The quantity of used oil accepted; and

vi. The date of acceptance;

2. Used oil processor/re-refiners shall keep a record of each shipment of used oil that is shipped to a used oil burner, processor/re-refiner, or disposal facility. These records may take the form of a log, invoice, manifest, bill of lading or other shipping documents. Records for each shipment shall include the following information:
i. The name and address of the transporter who delivers the used oil to the burner, processor/re-refiner or disposal facility;

ii. The name and address of the burner, processor/re-refiner or disposal facility who will receive the used oil;

iii. The EPA identification number of the transporter who delivers the used oil to the burner, processor/re-refiner or disposal facility;

iv. The EPA identification number of the burner, processor/re-refiner, or disposal facility who will receive the used oil;

v. The quantity of used oil shipped; and

vi. The date of shipment; and

3. The records described in (g)1 and 2 above shall be maintained on-site for at least three years.

(h) The following are the operating record and reporting standards for used oil processors and re-refiners:

1. The owner or operator shall keep a written operating record at the facility. The following information shall be recorded, as it becomes available, and maintained in the operating record until closure of the facility:
i. Records and results of used oil analyses performed as described in the analysis plan required under 7:26A-6.7(f); and

ii. Summary reports and details of all incidents that require implementation of the contingency plan an specified in 7:26A-6.7(c)2;

2. A used oil processor/re-refiner shall report to the Department, in the form of a letter, on a biennial basis (by March 1 of each even numbered year), the following information concerning used oil activities during the previous calendar year:
i. The EPA identification number, name, and address of the processor/re-refiner;

ii. The calendar year covered by the report; and

iii. The quantities of used oil accepted for processing/re-refining and the manner in which the used oil is processed/re-refined, including the specific processes employed.

(i) Used oil processors/re-refiners who initiate shipments of used oil off-site shall ship the used oil using a used oil transporter who has obtained an EPA identification number.

(j) Owners and operators who generate residues from the storage, processing, or re-fining of used oil shall manage the residues as specified in 7:26A-6.1(a)5.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.