New Jersey Administrative Code
Title 7 - ENVIRONMENTAL PROTECTION
Chapter 14A - NEW JERSEY POLLUTANT DISCHARGE ELIMINATION SYSTEM
Subchapter 23 - TECHNICAL REQUIREMENTS FOR TREATMENT WORKS APPROVAL APPLICATIONS
Section 7:14A-23.30 - Mechanical dewatering of residuals
Universal Citation: NJ Admin Code 7:14A-23.30
Current through Register Vol. 56, No. 24, December 18, 2024
(a) For installations where residuals are mechanically dewatered, mechanical dewatering equipment shall be provided in duplicate unless nuisance-free storage of residuals is provided in a manner approved by the Department.
1. Duplicate installation shall include
duplicate conditioning equipment, conveyors, feeders and other
appurtenances.
2. Capacity shall be
sufficient to process the residuals generated to prevent any day-to-day
accumulation.
3. The engineer's
report shall include complete data on capacity, residual volume to be handled,
conditioning methods, and equipment, chemical storage and satisfactory
management of residual cake.
4. The
plans shall show provisions for housing the dewatering equipment, for
ventilation and odor control, for handling and/or loading the residual cake and
the area and method proposed for ultimate management.
5. Filtrate collection and treatment shall be
provided and indicated.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
