New Jersey Administrative Code
Title 5 - COMMUNITY AFFAIRS
Chapter 23 - UNIFORM CONSTRUCTION CODE
Subchapter 4 - ENFORCING AGENCIES; DUTIES; POWERS; PROCEDURES
Section 5:23-4.26 - Certification of building elements
Universal Citation: NJ Admin Code 5:23-4.26
Current through Register Vol. 56, No. 18, September 16, 2024
(a) Building elements shall be certified in accordance with the following provisions:
1. Building elements, such as fire walls,
fire separation walls, wall panels, pre-stressed/prefabricated floor or roof
panels, and pre-engineered structural frames, built in accordance with the New
Jersey Uniform Construction Code, may be approved by (a)1i or ii below:
i. Approval for both design and construction
by a nationally recognized laboratory or a product certification agency. The
local municipal subcode official has the authority to accept such approvals
based on the evidence, test and/or documentation presented to him or
her;
ii. Approval for both design
and construction by a professional engineer licensed either in the State of New
Jersey or in the state of manufacture. The local municipal subcode official has
the authority to accept such approvals based on the evidence, of test and/or
documentation presented to him or her;
iii. If applicable, Fabricator Approval per
Section 1704.2.5.1 of the building subcode is required for Class 1 buildings in
addition to (a)1i or ii above.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
