New Jersey Administrative Code
Title 5 - COMMUNITY AFFAIRS
Chapter 17 - LEAD HAZARD EVALUATION AND ABATEMENT CODE
Subchapter 4 - PRE-ABATEMENT PREPARATION AND OCCUPANT PROTECTION
Section 5:17-4.4 - Air equipment
Universal Citation: NJ Admin Code 5:17-4.4
Current through Register Vol. 56, No. 18, September 16, 2024
(a) Negative air, at a rate of 10 air exchanges per hour, shall be required only when dry sanding or abrasive blasting are used. Dry sanding or abrasive blasting shall be allowed only by variation granted pursuant to 5:17-5.3.
(b) Windows, doors, chimneys and other vents or openings shall be closed during abatement. If ventilation is required because of the needs of occupants, or because of chemical fumes, HEPA equipment to filter exhaust and supply clean outside air shall be used.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
