New Jersey Administrative Code
Title 5 - COMMUNITY AFFAIRS
Chapter 14A - CARNIVAL-AMUSEMENT RIDES
Subchapter 13 - INFLATABLE RIDES
Section 5:14A-13.3 - Type certification

1. An illustration or picture of the ride;

2. A description of the ride (height, width, length, and, if applicable, slide length);

3. Calculations for tie-down requirements for both soft and hard surfaces with a list of the requirements;

4. Operation, maintenance, and set-up manuals as required by 5:14A-2.14 and 13.6;

5. Design calculations per inflatable ride, or class of ride if the wind load areas are comparable, indicating the number of anchorage points and anchor size based upon live and wind loads. The calculations shall be signed and sealed by a professional engineer licensed to practice in the State of New Jersey or, when the design is performed out-of-State, another qualified individual with substantially equivalent credentials; and

6. Flame resistant standards to which all materials used in the fabrication of the ride were tested and which those fabrics passed. Fabric manufacturer test certifications shall be available from the ride manufacturer for each inflatable unit.