New Jersey Administrative Code
Title 5 - COMMUNITY AFFAIRS
Chapter 14A - CARNIVAL-AMUSEMENT RIDES
Subchapter 13 - INFLATABLE RIDES
Section 5:14A-13.13 - Assembly and disassembly

Universal Citation: NJ Admin Code 5:14A-13.13

Current through Register Vol. 56, No. 18, September 16, 2024

(a) A thorough check of the inflatable ride and its accessories shall be carried out by a qualified person before its use. This check shall ensure that all anchor points, anchor ropes, and anchor stakes or ballasts are undamaged and suitable for continued use.

(b) Illustrations and detailed instructions shall be provided for setting up an inflatable ride.

(c) Anchorage requirements:

1. Stakes or ballast shall be used at every anchorage point and shall be installed per manufacturer requirements;

2. Stakes with restraining hooks or collars at the top shall be used to prevent the attached rope from sliding up and releasing; and

3. Anchoring shall not create a tripping hazard.

(d) All tie-down ropes attached to the inflatable ride shall be fastened to a stake or anchorage. Any rope that becomes detached from the structure shall be replaced with ropes of at least equivalent breaking strength, and shall be attached with equivalent or greater attachment strength.

(e) During assembly, proper clearance on all sides and top of the inflatable ride shall be observed as per the manufacturer's requirements and 5:14A-9.14.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.