New Jersey Administrative Code
Title 5 - COMMUNITY AFFAIRS
Chapter 14A - CARNIVAL-AMUSEMENT RIDES
Subchapter 13 - INFLATABLE RIDES
Section 5:14A-13.12 - Identification and data plate
Universal Citation: NJ Admin Code 5:14A-13.12
Current through Register Vol. 56, No. 18, September 16, 2024
(a) Every inflatable ride shall have an identification and data plate attached to it that is either sewn or glued to the unit. The identification and data plate shall include the following information:
1.
The name and address of manufacturer;
2. The ride name;
3. The ride serial number;
4. The date of manufacture;
5. The rider capacity by weight and
number;
6. Cubic feet per minute
(CFM) required to properly inflate the ride;
7. The type of blower to be used;
and
8. The flame resistant
standards by which all materials used in the fabrication of the ride were
tested and passed.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
