Current through Register Vol. 56, No. 18, September 16, 2024
(a)
The "American National Standard for Passenger Ropeways - Aerial Tramways,
Aerial Lifts, Surface Lifts, Tows and Conveyors - Safety Requirements,"
designated by the American National Standards Institute (ANSI) as B 77.1-2011
and B77.1a-2012, is incorporated herein by reference, as amended and
supplemented, and made part of this subchapter and shall be enforced as part of
this subchapter.
(b)
Notwithstanding any provisions stated in the standard, where specific
provisions of the standard conflict with the provisions expressly set forth in
this chapter, the provisions set forth in this chapter shall govern.
(c) The following sections of the standard
are modified as follows:
1. Section 1,
General Requirements, shall be amended as follows:
i. Section 1.2.4.1, the words "design review
completed by" shall be deleted and the words "all required design review
documents, per N.J.A.C. 5:12, submitted to" shall be inserted in their place.
Also, the words "the effective date of this standard" shall be deleted and the
date "August 21, 2017" shall be inserted in their place. Also, add the
following sentence at the end of the first paragraph: "However, design review
documents submitted to the authority having jurisdiction between February 21,
2017 and August 21, 2017, when not in compliance with requirements of this
edition, shall comply with requirements of the code in force immediately
preceding February 21, 2017."
ii.
Section 1.2.4.3, the words "design review completed by" shall be deleted and
the words "required design review documents, per N.J.A.C. 5:12, submitted to"
shall be inserted in their place. Also, the words "the effective date of this
standard" shall be deleted and the date "August 21, 2017" shall be inserted in
their place.
2. Section
2, Aerial Tramways, shall be amended as follows:
i. Section 2.3.1.1, the date "Nov.1, 2007"
shall be deleted and the date "February 21, 2018" shall be inserted. Also, the
date "Nov.1, 2008" shall be deleted and the date "February 21, 2019" shall be
inserted.
ii. Section 2.3.4.4, the
words "with initial testing being completed prior to February 21, 2018" shall
be added to the end of the first sentence.
3. Section 3, Detachable grip aerial lifts,
shall be amended as follows:
i. Section
3.3.1.1, the date "Nov.1, 2007" shall be deleted and the date "February 21,
2018" shall be inserted. Also, in four places the date "Nov.1, 2008" shall be
deleted and the date "February 21, 2019" shall be inserted.
ii. Section 3.3.4.4, the words "with initial
testing being completed prior to February 21, 2018" shall be added to the end
of the first sentence.
4. Section 4, Fixed grip aerial lifts, shall
be amended as follows:
i. Section 4.3.1.1,
the date "Nov.1, 2007" shall be deleted and the date "February 21, 2018" shall
be inserted. Also, in four places the date "Nov.1, 2008" shall be deleted and
the date "February 21, 2019" shall be inserted.
ii. Section 4.3.4.4, the words "with initial
testing being completed prior to February 21, 2018" shall be added to the end
of the first sentence.
5. Section 5, Surface lifts, shall be amended
as follows:
i. Section 5.3.1.1, the date
"Nov.1, 2007" shall be deleted and the date "February 21, 2018" shall be
inserted. Also, in three places the date "Nov.1, 2008" shall be deleted and the
date "February 21, 2019" shall be inserted.
6. Section 6, Tows, shall be amended as
follows:
i. Section 6.3.1.1, the date "Nov.1,
2007" shall be deleted and the date "February 21, 2018" shall be inserted.
Also, the date "Nov.1, 2008" shall be deleted and the date "February 21, 2019"
shall be inserted.