New Jersey Administrative Code
Title 16 - TRANSPORTATION
Chapter 62 - AIR SAFETY AND ZONING
Subchapter 3 - DELINEATION OF AIRPORT SAFETY ZONES
Section 16:62-3.5 - Delineation of the CLEAR ZONES
Universal Citation: NJ Admin Code 16:62-3.5
Current through Register Vol. 56, No. 6, March 18, 2024
(a) The CLEAR ZONES of an Airport Safety Zone shall consist of trapezoids located within the RUNWAY END SUBZONE along the flight approach and departure path.
(b) Each CLEAR ZONE shall extend 1000 feet from the end of the RUNWAY SUBZONE, as measured along the extended centerline of the RUNWAY.
(c) The base of the Clear Zone shall be co-located with the end of the RUNWAY SUBZONE, and shall have a width of 250 feet. The width of the CLEAR ZONE shall increase as the distance from the end of the Runway Safety Zone increases. Its final width shall be 450 feet.
(d) The methodology used to delineate the CLEAR ZONE of an Airport Safety Zone is illustrated in Figure 7.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
