New Jersey Administrative Code
Title 16 - TRANSPORTATION
Chapter 62 - AIR SAFETY AND ZONING
Subchapter 3 - DELINEATION OF AIRPORT SAFETY ZONES
Section 16:62-3.4 - Delineation of the RUNWAY END SUBZONES

Universal Citation: NJ Admin Code 16:62-3.4

Current through Register Vol. 56, No. 18, September 16, 2024

(a) The RUNWAY END SUBZONES of an Airport Safety Zone shall consist of trapezoids located at either end of the RUNWAY SUBZONE along the flight approach and departure path.

(b) Each RUNWAY END SUBZONE shall extend 3000 feet from the end of the RUNWAY SUBZONE, as measured along the extended centerline of the runway.

(c) The base of the RUNWAY END SUBZONE shall be defined by the end of the RUNWAY SUBZONE, and shall have a width of 2350 feet. The width of the RUNWAY END SUBZONE shall narrow as the distance from the end of the RUNWAY SUBZONE increases. Its final width shall be 850 feet.

(d) The methodology used to delineate the RUNWAY END SUBZONE of an Airport Safety Zone is illustrated in Figure 2.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.