New Jersey Administrative Code
Title 16 - TRANSPORTATION
Chapter 62 - AIR SAFETY AND ZONING
Subchapter 3 - DELINEATION OF AIRPORT SAFETY ZONES
Section 16:62-3.2 - Methodology used to delineate Airport Safety Zones

Universal Citation: NJ Admin Code 16:62-3.2

Current through Register Vol. 56, No. 18, September 16, 2024

(a) An Airport Safety Zone shall be established for each runway at an airport.

(b) Each Airport Safety Zone shall consist of a RUNWAY SUBZONE, two RUNWAY END SUBZONES and two CLEAR ZONES.

(c) The overall Airport Safety Zone for an airport is geometrically constructed by defining and locating the RUNWAY SUBZONE and RUNWAY END SUBZONES for each runway open to the public on an airport open to the public. The outermost borders of the subzones comprise the outermost boundary of the Airport Safety Zone. The area within those outermost boundaries is that area regulated by the provisions of this chapter.

(d) The methodology used to delineate the overall construction and outermost boundaries of the Airport Safety Zone for an airport is further graphically depicted in Figure 3.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.