New Jersey Administrative Code
Title 16 - TRANSPORTATION
Chapter 47 - STATE HIGHWAY ACCESS MANAGEMENT CODE
Subchapter 3 - DESIGNATION OF LIMITED ACCESS
Section 16:47-3.7 - Driveway surfacing
Universal Citation: NJ Admin Code 16:47-3.7
Current through Register Vol. 56, No. 24, December 18, 2024
(a) The Department has jurisdiction over driveways within the limits of its right-of-way; however, the Department is not responsible for maintaining driveways.
(b) Paving of driveways shall not extend beyond the curbline into the highway shoulder or travel lane area. The existing grade of the highway shoulder or travel lane shall be maintained at all times.
(c) All driveways shall be paved with concrete or bituminous material between the curbline and the right-of-way line.
1.
Bituminous driveways shall not be inferior to four inches (100 millimeters) of
bituminous stabilized base with a bituminous concrete surface two inches (50
millimeters) thick. All unsuitable base material shall be removed before the
driveway pavement is constructed.
2. Concrete driveways shall be constructed of
Class B concrete, at least six inches (150 millimeters) thick. All unsuitable
base material shall be removed before the driveway pavement is
constructed.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
