Current through Register Vol. 56, No. 18, September 16, 2024
(a) Utility design and construction are subject to
minimum safety standards and construction requirements prescribed by national or
industry standard codes.
(b) In the
absence of applicable national, State, or local regulatory agency standard codes,
the industry standard code shall apply.
(c) The minimum applicable standards set forth in
the Department's Design Standards shall apply in all instances where any such
applicable highway specifications are more restrictive or require greater safety
factors or higher standards of construction, materials, or workmanship than the
applicable national or industry standard code. The Design Standards, which are
incorporated herein by reference, as amended and supplemented, are as follows:
1. The New Jersey Department of Transportation
Roadway Design Manual, 2015 edition, available from the Department's Engineering
Documents Unit at (609) 963-1465 or on the Department's website at:
www.nj.gov/transportation/eng/documents/RDM/;
2. The New Jersey Department of Transportation
Bridges and Structures Design Manual, 6<th> edition, available from the
Department's Engineering Documents Unit at (609) 963-1465 or on the Department's
website at:
www.nj.gov/transportation/eng/documents/BSDM/;
3. The New Jersey Department of Transportation
Standard Specifications for Road and Bridge Construction, 2019 edition, available
from the Department's Engineering Documents Unit at (609) 963-1465 or on the
Department's website at:
www.nj.gov/transportation/eng/;
4. The New Jersey Department of Transportation
Sample Plans, 2016, available from the Department's Engineering Documents Unit at
(609) 963-1465 or on the Department's website at:
www.nj.gov/transportation/eng/;
5. The New Jersey Department of Transportation
Standard Roadway Construction/Traffic Control/Bridge Construction Details, 2016,
available from the Department's Engineering Documents Unit at (609) 963-1465 or on
the Department's website at:
www.nj.gov/transportation/eng/;
6. The New Jersey Department of Transportation
Standard Electrical Details, 2007 edition, available from the Department's
Engineering Documents Unit at (609) 963-1465 or on the Department's website at:
www.nj.gov/transportation/eng/elec/;
and
7. The New Jersey Department of
Transportation's Soil Erosion and Sediment Control Standards, 2008 edition, as
required under the Soil Erosion and Sediment Control Act,
N.J.S.A.
4:24-39 et seq., available from the Department's
Engineering Documents Unit at (609) 963-1465 or on the Department's website at
www.nj.gov/transportation/eng/documents/SESC/.
(d) Additional governmental and
industry standards that are applicable, which are incorporated herein by reference,
as amended and supplemented, are as follows:
1. A
Policy on Geometric Design of Highways and Streets, 7th edition, available from the
American Association of State Highway and Transportation Officials (AASHTO), Suite
249, 444 North Capitol St., NW, Washington, DC 20001, or on the AASHTO website at:
http://bookstore.transportation.org;
2.
A Guide for Accommodating Utilities Within Highway Right-of-Way, 4th Edition,
available from AASHTO, Suite 249, 444 North Capital St., NH, Washington, DC, 20001,
or on the AASHTO website at:
http://bookstore.transportation.org;
3. A Policy on Design Standards--Interstate
System, 2016 edition, available from the American Association of State Highway and
Transportation Officials (AASHTO), Suite 249, 444 North Capitol St., NW, Washington,
DC 20001, or on the AASHTO website at:
http://bookstore.transportation.org;
4. Manual on Uniform Traffic Control Devices for
Streets and Highways (MUTCD), 2009 edition. The MUTCD is available on the Federal
Highway Administration website at:
http://mutcd.fhwa.dot.gov/ or on the AASHTO
website at:
http://bookstore.transportation.org/;
5. Roadside Design Guide, 4th edition, available
from the American Association of State Highway and Transportation Officials
(AASHTO), Suite 249, 444 North Capitol St., NW, Washington, DC 20001, or on the
AASHTO website at:
http://bookstore.transportation.org/;
6. The National Electrical Safety Code (NESC),
2023 edition, available from IEEE Publications Office, 10662 Los Vaqueros Circle,
P.O. Box 3014, Los Alamitos, CA 90720-1264, or on the IEEE website at:
http://standards.ieee.org/nesc/nescproducts.html;
7. API RP 1102, Recommended Practice for Steel
Pipelines Crossing Railroads and Highways, 7th Edition, 2007, available from the
American Petroleum Institute (API), 1220 L Street, NW, Washington, DC 20005-4070, or
on the API website at: http://api-ec.api.org/Publications/ [File Link Not
Available];
8. American Water Works
Association Standards, in effect as of the date of the standard is applied,
available from the American Water Works Association 6666 W. Quincy Avenue, Denver,
CO 80235, or on the AWWA website at:
http://apps.awwa.org/EbusMain/Default.aspx?TabId=55&=6855 [File Link Not
Available];
9. The ANSI Standard Code
for Pressure Piping, in effect as of the date the standard is applied, available
from the American National Standards Institute (ANSI), ANSI Customer Service
Department, 25 West 43rd Street, 4th Floor, New York, NY, 10036, or on the ANSI
website at:
www.webstore.ansi.org/;
and
10. ANSI Standard Codes for
Fiber-Optic Facilities, in effect as of the date the standard is applied, available
from the American National Standards Institute (ANSI), ANSI Customer Service
Department, 25 West 43rd Street, 4th Floor, New York, NY, 10036, or on the ANSI
website at:
www.webstore.ansi.org/.