New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 8A - LAWN MOWER RACING EVENTS
Section 13:62-8A.2 - Track construction

Universal Citation: NJ Admin Code 13:62-8A.2

Current through Register Vol. 56, No. 18, September 16, 2024

(a) Design and construction of lawn mower race courses must be approved by the Superintendent or designee prior to the racing event. Safety features, such as fences, crash protection, light or flagmen positions, spectator seating, entrances and exits, pit facility locations and other physical factors affecting the safety of spectators and participants may be required for approval depending on the terrain and location of the race course.

(b) A sketch or sketches of the track and associated areas shall be provided as near to scale as practicable indicating the location of required safety features.

(c) Inner and outer hub-rails shall be constructed of hay bales or similar material, spaced no more than two feet apart.

(d) The pit area shall be constructed away from the race track and shall be configured so that the pit entrance and pit exit are separate.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.