New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 4 - SAFETY REQUIREMENTS FOR VEHICLES AND PERSONNEL: OVAL RACING
Section 13:62-4.30 - Enclosed drive shaft
Universal Citation: NJ Admin Code 13:62-4.30
Current through Register Vol. 56, No. 18, September 16, 2024
The drive shaft of a vehicle measuring 36 inches and over shall be enclosed or secure, front and rear, by two steel straps, 1/4 inch thick by one inch wide, two 1/2 inch steel rods, or one inch steel tubing with .06 wall thickness. Drive shafts measuring under 36 inches shall require enclosure by only one steel strap.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
