New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 3 - SAFETY REQUIREMENTS FOR VEHICLES AND PERSONNEL: ROAD RACING AND HIGH PERFORMANCE DRIVING SCHOOLS
Section 13:62-3.13 - Rollover bars

Universal Citation: NJ Admin Code 13:62-3.13

Current through Register Vol. 56, No. 18, September 16, 2024

(a) Rollover protection is required for all open cockpit or convertible vehicles. Roll bar padding meeting SFI Specification 45.1 is mandatory anywhere a drivers helmet or body may come in contact with roll bar components. SFI Specification 45.1 (August 11, 2005), is incorporated herein by reference, as amended and supplemented and available at http://www.sfifoundation.com. SFI roll bar padding standards are available from the SFI Foundation, Inc., 15708 Pomerado Road, Suite N208, Poway, CA 92064.

(b) Factory provided rollover protection (production vehicles) may be used for promotional and touring events, time trials, drivers schools, and lapping days providing that the height of any vehicle occupant (with helmet) is not higher than the highest point of the factory rollover protection structure.

(c) Convertibles and open vehicles (except motorcycles) in races and race practices shall have a roll bar or main hoop extending beyond the head or helmet of any vehicle driver or instructor. Removable hardtops shall not constitute rollover protection.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.