New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 11 - MUD HOP
Section 13:62-11.20 - Seats

Universal Citation: NJ Admin Code 13:62-11.20

Current through Register Vol. 56, No. 18, September 16, 2024

(a) A factory installed front seat may be utilized provided it is equipped with a headrest.

(b) Seats shall be attached to the main frame of the vehicle, the frame of the roll cage or to a substantial metal plate utilizing a minimum of six, three line, five-sixteenths inch bolts.

(c) The base of the seat shall be installed with four five-sixteenths inch bolts not more than three inches from the outside edge of the four most practical points.

(d) Two bolts shall be installed at the two most practical points at the top of the back of the seat and a metal strap of at least two inches in width and one-eighth inch in thickness shall connect every two bolts.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.