New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 11 - MUD HOP
Section 13:62-11.14 - Rollover cage

Universal Citation: NJ Admin Code 13:62-11.14

Current through Register Vol. 56, No. 18, September 16, 2024

(a) Open cab vehicles shall be equipped with rollover cage surrounding the driver of a design, construction and quality affording the driver maximum protection against injury.

(b) Rollover bars installed in vehicles shall be a minimum of three inches above and six inches behind the driver's helmet.

(c) Rollover bars shall be a minimum of 1 3/4 inch outside diameter with a wall thickness of a minimum of.09 inch.

(d) Rollover bars welded, bolted or fastened to the flooring shall utilize a six inch by six inch by 1/4 inch base plate.

(e) Vehicles having uni-body construction may have a rollover bar welded to the frame of the vehicle utilizing six inch by six inch by 1/4 inch base plate affixed to the outer flooring.

(f) Rollover bars shall be plainly visible with the exception of built-in or integral rollover bars.

(g) Owners of vehicles with built-in or integral rollover bars shall maintain and provide upon request by the Superintendent or designee the manufacturer's detail drawing establishing the dimensions and material utilized.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.