New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 10 - AUTOMOBILE ENDURO EVENTS (OTHER THAN AT LICENSED ROAD COURSE FACILITIES)
Section 13:62-10.19 - Rollover cage

Universal Citation: NJ Admin Code 13:62-10.19

Current through Register Vol. 56, No. 18, September 16, 2024

(a) All race cars shall be equipped with a rollover cage surrounding the driver of a design, construction and quality affording the driver maximum protection against injury.

(b) Rollover bars installed in vehicle shall be a minimum of three inches above and six inches behind the driver's helmet.

(c) The outside diameter of the rollover bars shall be a minimum of one and three-quarters inch and wall thickness a minimum of.09 inch.

(d) Rollover bars welded, bolted or fastened to the flooring shall utilize a six inch by six inch by one-quarter inch base plate.

(e) Vehicles having uni-body construction may install a rollover bar welded to the frame of the vehicle utilizing six inch by six inch by one-quarter inch base plate affixed to outer flooring.

(f) Rollover bars shall be plainly visible with the exception of built-in or integral rollover bars.

(g) Vehicles with built-in or integral rollover bars shall maintain and provide upon request by the Superintendent or designee the manufacturer's detailed drawing establishing the dimensions and material utilized.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.