New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 62 - MOTOR VEHICLE RACE TRACK RULES
Subchapter 10 - AUTOMOBILE ENDURO EVENTS (OTHER THAN AT LICENSED ROAD COURSE FACILITIES)
Section 13:62-10.10 - Vehicle interior and exterior requirements

Universal Citation: NJ Admin Code 13:62-10.10

Current through Register Vol. 56, No. 18, September 16, 2024

(a) Chrome and nonmetallic trim shall be removed from sides of the vehicle.

(b) Passenger seats shall be removed from the interior of the vehicle.

(c) A safety hub or reinforced wheel is required on the vehicle's right front wheel.

(d) All doors shall be bolted, chained or welded closed. Any door opening during an event shall constitute automatic disqualification.

(e) The exterior of the driver's side door shall have at least one metal brace at bumper height.

(f) All vehicles shall retain stock appearance with no alterations to fenders or wheel wells.

(g) Strengthening or stiffening of the front end is prohibited. Non-original equipment manufacturer's (OEM) supports are prohibited forward of the front ball joints.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.