New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 31 - BOARD OF EXAMINERS OF ELECTRICAL CONTRACTORS
Subchapter 3 - STANDARDS OF PRACTICE
Section 13:31-3.2 - Work standards and inspections
Current through Register Vol. 56, No. 6, March 18, 2024
(a) Every licensee who performs or supervises the installation, erection, repair or alteration of electrical equipment for the generation, transmission or utilization of electrical energy subject to The Electrical Contractors Licensing Act of 1962, 45:5A-1 et seq., shall ensure that the work performed is in conformity with the standards of the State Uniform Construction Code Act, 52:27D-119 et seq., and its implementing rules set forth in the Uniform Construction Code, N.J.A.C. 5:23, in effect at the time work is performed.
(b) Every licensee who performs or supervises work described in (a) above shall secure permits when required and, within a reasonable time after completion of the work, secure an inspection of the completed work when required to ensure conformity with the State Uniform Construction Code Act, 52:27D-119 et seq., and its implementing rules set forth in the Uniform Construction Code, N.J.A.C. 5:23.
(c) Every licensee shall be responsible for correcting, within a reasonable time and at no additional charge to the customer, any Code violation discovered in the work performed or supervised by the licensee.
(d) Failure to comply with (a), (b) or (c) above may be deemed occupational misconduct within the meaning of 45:1-21(e) and may subject the licensee to disciplinary action as set forth in 45:1-21 et seq.
