New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 21 - LICENSING SERVICE
Subchapter 23 - COMMERCIAL DRIVER LICENSING
Section 13:21-23.13 - Requirements for tank vehicle endorsement
Universal Citation: NJ Admin Code 13:21-23.13
Current through Register Vol. 56, No. 18, September 16, 2024
(a) In order to obtain a tank vehicle endorsement, each applicant must have knowledge covering the following:
1. Causes, prevention, and effects of cargo surge
on motor vehicle handling;
2. Proper
braking procedures for the motor vehicle when it is empty, full and partially
full;
3. Differences in handling of
baffled/compartmental tank interiors versus non-baffled motor vehicles;
4. Differences in tank vehicle type and
construction;
5. Differences in cargo
surge for liquids of varying product densities;
6. Effects of road grade and curvature on motor
vehicle handling with filled, half-filled and empty tanks;
7. Proper use of emergency systems; and
8. For drivers of Federal Department of
Transportation specification tank vehicles, retest and marking
requirements.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
