New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 20 - ENFORCEMENT SERVICE
Subchapter 50B - BODY STANDARDS FOR SCHOOL BUSES
Section 13:20-50B.43 - Undercoating

Universal Citation: NJ Admin Code 13:20-50B.43

Current through Register Vol. 56, No. 6, March 18, 2024

(a) The entire underside of the school bus body, including floor sections, cross members, and side panels below the floor line, may be coated with a rustproofing compound for which the compound manufacturer has issued a notarized certification of compliance to the bus body builder that the compound meets or exceeds all performance and qualitative requirements of applicable Federal specifications.

(b) The undercoating compound shall be applied with suitable airless or conventional spray equipment to the recommended film thickness and shall show no evidence of voids in the cured film. The undercoating material shall be nonflammable, shall not peel, crack, chip, or melt, and shall be stable under both high and low temperatures.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.