New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 20 - ENFORCEMENT SERVICE
Subchapter 24 - MOTORCYCLES AND AUTOCYCLES
Section 13:20-24.11 - Reflectorized surface on helmets
Universal Citation: NJ Admin Code 13:20-24.11
Current through Register Vol. 56, No. 6, March 18, 2024
A helmet shall have a reflectorized surface on both sides, or have securely affixed thereto reflectorized material on both the left and right side of the helmet. Such reflectorization must cover an area of at least four square inches on each side of the helmet. If reflectorized material, such as one-inch by four-inch strip of reflectorized safety tape is attached to each side of the helmet, it must be affixed in a permanent, weather-proof manner.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
