New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 20 - ENFORCEMENT SERVICE
Subchapter 15 - STUD TIRES
Section 13:20-15.1 - Definitions
Universal Citation: NJ Admin Code 13:20-15.1
Current through Register Vol. 56, No. 6, March 18, 2024
The following words and terms, when used in this subchapter, shall have the following meanings unless the context clearly indicates otherwise.
"Body of a tire" means the fabric or cord material to which the rubber tread material is bonded.
"Manufacturer" means the person or corporation who makes or fabricates the tire or tread.
"Psi" means pressure in pounds per square inch.
"Stud" means a pin type device prepared for installation in the tread of an automobile and consists of a tungsten carbide core bonded to an outer casing or shell of plastic, aluminum or steel.
"Stud tire" means an automobile tire fitted with studs in the tread in openings molded for that purpose by the tire or tread manufacturer.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
