New Jersey Administrative Code
Title 13 - LAW AND PUBLIC SAFETY
Chapter 19 - COMPLIANCE AND SAFETY
Subchapter 6 - INSTALLATION AND USE OF IGNITION INTERLOCK DEVICES
Section 13:19-6.6 - Application for certification of BAIID
Universal Citation: NJ Admin Code 13:19-6.6
Current through Register Vol. 56, No. 18, September 16, 2024
(a) A manufacturer seeking certification of a BAIID shall submit to the Chief Administrator a completed application on a form prescribed by the Chief Administrator.
(b) The manufacturer shall certify the following as to the BAIID for which the manufacturer seeks certification:
1. The installation and use of the BAIID shall not
impede the safe operation of a vehicle in which it is installed;
2. The BAIID complies with the requirements of
13:19-6.5;
3. The manufacturer carries liability insurance
meeting the requirements set forth in
13:19-6.8;
4. The manufacturer has a network of service
centers in New Jersey that comply with
13:19-6.11;
5. The manufacturer provides training to its
service center employees in the proper servicing of the BAIID and training to users
of the BAIID in the proper operation and use of the BAIID; and
6. The manufacturer shall provide BAIIDs to
indigents in accordance with
13:19-6.14.
(c) The manufacturer shall submit the following with its completed application:
1. A copy of the
written instructions for servicing the BAIID that will be provided to service center
employees, and a copy of the written instructions for proper operation and use of
the BAIID that will be provided to the user of the BAIID;
2. Technical specifications descriptive of the
BAIID's safety features, utility features, optional features and the manufacturer's
required service interval;
3. A copy of
the manufacturer's warranty of the BAIID;
4. A certificate of insurance from an insurance
company licensed in New Jersey evidencing that the manufacturer holds liability
insurance as required by
13:19-6.8;
5. A sample of the warning label it will affix to
each BAIID to comply with
13:19-6.5(c);
6. Proof that the BAIID was tested by an approved
ISO laboratory and was found to meet or exceed the NHTSA Model Specifications, or
alternatively, proof that another state has certified or approved the BAIID as
meeting or exceeding the NHTSA Model Specifications;
7. A list of all states that have certified or
approved the BAIID for use in a program that requires a BAIID to meet or exceed the
NHTSA Model Specifications, and the name, address and telephone number of the state
official responsible for the certification or approval;
8. A list of all states that have revoked,
suspended or denied certification or approval of the BAIID, the reasons for such
actions, and the name, address and telephone number of the state official
responsible for such actions;
9. A list
of all service centers in the manufacturer's network that comply with
13:19-6.11, including the address of
each, whether the facility is owned by the manufacturer or will be leased, rented,
or otherwise secured from the owner and the name, address and telephone number of
the owner; and
10. A list of employees
that will provide services related to BAIIDs at the manufacturer's service
centers.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
