New Jersey Administrative Code
Title 12 - LABOR AND WORKFORCE DEVELOPMENT
Chapter 190 - EXPLOSIVES
Subchapter 5 - STORAGE OF EXPLOSIVES
Section 12:190-5.6 - Construction of type 3 magazines

Universal Citation: NJ Admin Code 12:190-5.6

Current through Register Vol. 56, No. 18, September 16, 2024

(a) This section shall apply to the construction of type 3 magazines.

(b) A type 3 magazine shall be a "day-box" or other portable magazine. It shall be fire-resistant, weather resistant and theft resistant.

(c) A type 3 magazine shall be constructed of not less than 12 gauge (.1045 inch) steel lined with at least 1/2 inch plywood or 1/2 inch Masonite-type hardboard or comply with IME 22 specs.

(d) No sparking material shall be exposed to contact with stored explosive materials.

(e) Doors or covers shall overlap sides of type 3 magazines by not less than one inch.

(f) Hinges and hasps shall be attached by welding, riveting or bolting with nuts on the inside.

(g) One steel padlock (which need not be protected by a steel hood) having at least five tumblers and a case hardened shackle of not less than 3/8 inch diameter and a minimum of a 3/8 inch steel staple shall be provided for locking purposes.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.