New Jersey Administrative Code
Title 12 - LABOR AND WORKFORCE DEVELOPMENT
Chapter 185 - PITS AND QUARRIES (SAFETY REGULATION NUMBER 12)
Subchapter 31 - DUST CONTROL
Section 12:185-31.4 - Wet method of dust control

Universal Citation: NJ Admin Code 12:185-31.4

Current through Register Vol. 56, No. 18, September 16, 2024

(a) The wet method of dust control shall include an adequate and continuous supply of water delivered to the process and terminating in suitable water sprays or jets at the point of dust generation.

(b) Water used for dust control purposes shall not be cross connected with the drinking water supply and suitable provisions shall be made for the removal of water and sludge which drain from the operation.

(c) The wet method of dust control shall include and provide effective wetting at the point of dust generation with as little exposure of the operator to the water as possible. The application of water shall be so controlled as not to create a slipping hazard.

Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.