New Jersey Administrative Code
Title 12 - LABOR AND WORKFORCE DEVELOPMENT
Chapter 185 - PITS AND QUARRIES (SAFETY REGULATION NUMBER 12)
Subchapter 21 - GUARDING OF EQUIPMENT AND MACHINERY
Section 12:185-21.4 - Shafting
Universal Citation: NJ Admin Code 12:185-21.4
Current through Register Vol. 56, No. 18, September 16, 2024
All exposed parts of horizontal shafting seven feet or less from a floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be guarded by a stationary casing enclosing the shaft completely, or by a trough enclosing sides and top or sides and bottom of shafting, as location requires.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
