New Jersey Administrative Code
Title 12 - LABOR AND WORKFORCE DEVELOPMENT
Chapter 185 - PITS AND QUARRIES (SAFETY REGULATION NUMBER 12)
Subchapter 21 - GUARDING OF EQUIPMENT AND MACHINERY
Section 12:185-21.3 - Fly wheels
Universal Citation: NJ Admin Code 12:185-21.3
Current through Register Vol. 56, No. 18, September 16, 2024
(a) Fly wheels so located that any part is seven feet or less above the floor or platform shall be guarded in one of the following ways:
1. With an
enclosure of sheet, perforated or expanded metal or woven wire; or
2. With guard rails placed not less than 15 inches
from the rim.
(b) When a fly wheel extends into a pit or is within 12 inches of a floor, and a standard railing guard is used, a standard toeboard shall also be provided.
(c) When the upper rim of a fly wheel protrudes through a working floor, it shall be entirely enclosed or surrounded by a guard rail and toeboard.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
