New Jersey Administrative Code
Title 12 - LABOR AND WORKFORCE DEVELOPMENT
Chapter 100 - SAFETY AND HEALTH STANDARDS FOR PUBLIC EMPLOYEES
Subchapter 17 - GEAR CERTIFICATION
Section 12:100-17.2 - Adoption by reference
Universal Citation: NJ Admin Code 12:100-17.2
Current through Register Vol. 56, No. 18, September 16, 2024
(a) The standards contained in 29 CFR Part 1919, Gear Certification, with the amendments published in the Federal Register through November 18, 2009 and any subsequent amendments thereto, are adopted upon publication in the New Jersey Register and are incorporated herein by reference as occupational safety and health standards and shall include:
1. Subpart A--General
Provisions;
2. Subpart B--Procedure
Governing Accreditation;
3. Subpart
C--Duties of Persons Accredited to Certificate Vessels' Cargo Gear;
4. Subpart D--Certification of Vessels' Cargo
Gear;
5. Subpart E--Certification of
Vessels: Tests and Proof Loads; Heat Treatment; Competent Persons;
6. Subpart F--Accreditation to Certificate
Shore-Based Equipment;
7. Subpart
G--Duties of Persons Accredited to Certificate Shore-Based Material Handling
Devices; and
8. Subpart H--Certification
of Shore-Based Material Handling Devices.
Disclaimer: These regulations may not be the most recent version. New Jersey may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
