New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 5000 - DISPLAY FIREWORKS
Part Saf-C 5023 - ELECTRICAL DISPLAY FIRING
Section Saf-C 5023.02 - Operator Requirements
Universal Citation: NH Admin Rules Saf-C 5023.02
Current through Register No. 40, October 3, 2024
(a) For each electrical display firing, the operator shall comply with the following:
(1) All firing shall be done from a remote
central control location that provides the operator(s) with an unobstructed
view of the entire display;
(2) All
wiring and firing system set-up shall be done under the direct control of the
operator who shall also insure that the firing device or control panel is
properly safeguarded; and
(3) Prior
to the display, precautions shall be taken to preclude the possibility of
premature ignition due to stray sources of electrical or radio frequency
energy.
(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95; amd by #7481, eff 4-25-01; paragraphs (a)(2)-(3) EXPIRED: 7-1-03; amd by #8117, INTERIM, eff 7-14-04; paragraphs (a)(2)-(3) EXPIRED: 1-10-05; amd by #8261, eff 1-21-05; amd by #9471, INTERIM, eff 5-15-09, EXPIRED: 11-11-09
New. #9765-A, eff 8-2-10
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
