New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 5000 - DISPLAY FIREWORKS
Part Saf-C 5020 - SINGLE SHOT OR FINALE MORTARS RACKS
Section Saf-C 5020.01 - Construction

Universal Citation: NH Admin Rules Saf-C 5020.01

Current through Register No. 40, October 3, 2024

(a) Single shot or "finale" mortars up to 6 inches in diameter and used in racks shall be constructed of a minimum of 18 gauge galvanized metal with welded seams, SDR 21 high density polyethylene pipe or similar material, or of any approved non-fragmentary type material, as determined pursuant to Saf-C 5019.01(c). Wood plug base ends shall be permitted for single shot or finale mortars made from HDPE, fiberglass or similar materials.

(b) Single shot or "finale" mortars in excess of 6 inches in diameter shall be constructed of non-fragmenting steel or aluminum only and shall be placed and utilized in accordance with Saf-C 5019.01.

(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95, EXPIRED: 7-1-03

New. #8117, INTERIM, eff 7-14-04, EXPIRED: 1-10-05

New. #8261, eff 1-21-05; ss by #9765-A, eff 8-2-10

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.