New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 5000 - DISPLAY FIREWORKS
Part Saf-C 5013 - CONSTRUCTION OF PADLOCKS, STEEL CAPS AND HOODS
Section Saf-C 5013.02 - Steel Caps and Hoods
Universal Citation: NH Admin Rules Saf-C 5013.02
Current through Register No. 40, October 3, 2024
Whenever steel caps or hoods are required to protect padlocks, the steel cap or hood shall be constructed of not less than 1/4 inch steel and shall be designed to eliminate access to the hasp between the hood or cap and magazine. An extra 1/4 inch steel shall be required by the director when it is necessary to prevent the cutting of any part of the locking assembly.
(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95, EXPIRED: 7-1-03
New. #8117, INTERIM, eff 7-14-04, EXPIRED: 1-10-05
New. #8261, eff 1-21-05; ss by #9765-A, eff 8-2-10
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
