New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 5000 - DISPLAY FIREWORKS
Part Saf-C 5009 - CONSTRUCTION OF TYPE 4 MAGAZINES
Section Saf-C 5009.02 - Doors

Universal Citation: NH Admin Rules Saf-C 5009.02

Current through Register No. 40, October 3, 2024

(a) The doors or covers of a Type 4 magazine shall be metal or solid wood covered with metal. Hinges and hasps shall be attached to doors by welding, riveting, or bolting with the nuts on the inside of the door. Hinges and hasps shall be installed in such a manner that they cannot be removed when the doors are closed and locked.

(b) Each door shall be equipped with:

(1) 2 mortise locks;

(2) 2 padlocks fastened in separate hasps and staples;

(3) A combination of mortise lock and padlock;

(4) A mortise lock that requires 2 keys to open; or

(5) A 3-point lock.

(c) Locks shall be 5-tumbler proof. All padlocks shall be protected with 1/4 inch steel caps constructed so as to prevent locks or hasps from being pried or sawed.

(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95, EXPIRED 7-1-03

New. #8117, INTERIM, eff 7-14-04, EXPIRED: 1-10-05

New. #8261, eff 1-21-05; ss by #9765-A, eff 8-2-10

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.