New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3240 - OTHER MOTORCYCLE EQUIPMENT
Section Saf-C 3240.01 - Other Equipment
Universal Citation: NH Admin Rules Saf-C 3240.01
Current through Register No. 40, October 3, 2024
(a) A motorcycle shall be rejected if:
(1) A primary or
secondary drive chain or belt is not equipped with a guard or covering device
to prevent contact with the driver or passenger;
(2) It is designed to carry more than one
person and does not have a handhold equivalent to the manufacturer's
specifications;
(3) It is not
equipped with footrests for each person the motorcycle is designed to
carry;
(4) It has footrests which
are not accessible to a passenger's feet, or a footrest which does not fold to
the rear or upward when the footrests protrude beyond the width of any portion
of the motorcycle frame or motor; or
(5) In the event it is equipped with highway
bars:
a. The highway bars have a width
greater than 32 inches;
b. The
highway bars are located 15 inches or more from the foot controls; or
c. The highway bars interfere with the safe
operation of the foot controls.
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
