New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3234 - MOTORCYCLE WHEELS AND TIRES
Section Saf-C 3234.03 - Fabric Breaks, Cuts and Blowout Repairs
Universal Citation: NH Admin Rules Saf-C 3234.03
Current through Register No. 40, October 3, 2024
(a) A motorcycle shall be rejected if a tire has:
(1) A fabric
break;
(2) A cut, break or weather
crack which is:
a. In excess of one inch in
any direction as measured on the outside of the tire; or
b. Deep enough to reach the body
cords;
(3) Temporary
repairs made with blowout patches or boots;
(4) Any bumps, bulges or knots related to
separation or partial failure of the tire structure;
(5) Any portion of the ply or cord structure
exposed through the tread; or
(6) A
portion of the tread completely worn, which is of sufficient size to affect the
traction and stopping ability of the tire.
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
