New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3229 - MOTORCYCLE STEERING, ALIGNMENT AND SUSPENSION
Section Saf-C 3229.09 - Wheel Tracking Alignment
Universal Citation: NH Admin Rules Saf-C 3229.09
Current through Register No. 40, October 3, 2024
(a) A motorcycle shall be rejected if the wheel tracking alignment deviates from the following requirements by more than one inch in any direction:
(1) The wheels of a 2 wheel motorcycle shall
track in the same plane when the motorcycle is traveling along a straight
line;
(2) The line of traction of
the rear wheels of a 3 wheel motorcycle shall be perpendicular to the axle on
which they are mounted; and
(3) The
line of traction of the rear wheels of a 3 wheel motorcycle shall be parallel
to the front wheel.
(b) A motorcycle shall be rejected if it is not equipped with an adjustment feature that provides wheel tracking.
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
