New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3228 - MOTORCYCLE INSPECTION REQUIREMENTS
Section Saf-C 3228.02 - Tools Required
Universal Citation: NH Admin Rules Saf-C 3228.02
Current through Register No. 40, October 3, 2024
(a) Each inspection station conducting motorcycle inspections shall have the following tools and equipment:
(1) Straight line on floor to
check tracking of wheels;
(2)
Straight edge with pointed end, minimum 3 feet long, and a 2 foot level, to
check trail;
(3) Adjustable
protractor capable of checking rake on front forks;
(4) Vernier caliper to measure thickness of
rotors;
(5) Tire pressure
gauge;
(6) Tread depth
gauge;
(7) Decibel meter ANSI Type
1 or 2, capable of external calibration and equipped with a wind
screen;
(8) External field
calibrator with an accuracy of plus or minus 0.5 decibels;
(9) Anemometer for measuring wind
speed;
(10) Device or method of
measuring engine speed of motorcycles not so equipped;
(11) Tape measure;
(12) Headlight wall or board or commercially
manufactured headlight aiming device capable of determining the proper
headlight angle of all vehicles to be inspected; and
(13) Frame lift or other lift device capable
of raising the front or rear wheel off the floor.
(b) If the inspection station inspects motorcycles with ball joints, the following tools shall be required:
(1) A dial indicator capable of measuring
suspension components, including ball joints; and
(2) A lift or jack capable of hoisting such
motorcycles.
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.