New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3211 - WHEELS AND TIRES
Section Saf-C 3211.05 - Wheel Condition
Universal Citation: NH Admin Rules Saf-C 3211.05
Current through Register No. 40, October 3, 2024
(a) A vehicle shall be rejected if:
(1) Wheel bolts, studs or
lugs are loose, missing or damaged; or
(2) The wheel is bent, cracked, re-welded,
damaged, or has elongated bolt holes, and this affects the safe operation of
the vehicle; or
(3) Any other
defect that affects the safe operation of the vehicle.
(b) If a vehicle of any kind, including passenger vehicles, vans, light-duty trucks, trucks, buses and multipurpose passenger vehicles, is equipped with an exterior spare tire carrier, the vehicle shall fail inspection requirements if:
(1) Upon visual inspection, the spare
tire/wheel assembly or carrier is not securely fastened to the vehicle;
or
(2) The spare tire/wheel
assembly or carrier is cracked or rusted to the degree that it might allow the
spare tire or wheel to become unattached or fall off the vehicle.
(See Revision Notes at Chapter Heading Saf-C 3200) #8915, eff 6-22-07; ss by #10189, eff 9-27-12)
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
