New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3211 - WHEELS AND TIRES
Section Saf-C 3211.01 - Fabric Breaks, Cuts and Blowout Repairs

Universal Citation: NH Admin Rules Saf-C 3211.01

Current through Register No. 40, October 3, 2024

(a) A vehicle shall be rejected if a tire has:

(1) A fabric break;

(2) A cut, break or weather crack which is:
a. In excess of one inch in any direction as measured on the outside of the tire; and

b. Deep enough to reach the body cords;

(3) Temporary repairs made with blowout patches or boots;

(4) Any bumps, bulges or knots related to separation or partial failure of the tire structure; or

(5) Any portion of the ply or cord structure exposed through the tread.

(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.