New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3206 - INSPECTION AREA AND EQUIPMENT
Section Saf-C 3206.02 - Inspection Area Requirements
Universal Citation: NH Admin Rules Saf-C 3206.02
Current through Register No. 40, October 3, 2024
(a) Each inspection station shall:
(1) Have a testing space that
has no obstructions and is large enough for a mechanic to walk around a vehicle
with its doors open;
(2) Be a
minimum of 12 feet by 25 feet in length, if the station inspects motor
vehicles;
(3) Be a minimum of 12
feet by 50 feet in length, if the station is equipped with a headlight testing
screen or board; and
(4) Be a
minimum of 8 feet by 12 feet in length, if the station inspects only
motorcycles, and have a compliant sound inspection area per
Saf-C
3236.03.
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
