New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 3200 - OFFICIAL MOTOR VEHICLE INSPECTION REQUIREMENTS
Part Saf-C 3206 - INSPECTION AREA AND EQUIPMENT
Section Saf-C 3206.01 - Inspection Area
Universal Citation: NH Admin Rules Saf-C 3206.01
Current through Register No. 40, October 3, 2024
(a) The inspection area shall:
(1) Be within an enclosed
building, unless approved by the director as a mobile service garage;
(2) Be in good repair;
(3) Be maintained in a safe working condition
for both employees and members of the public, in the event the public is
allowed to enter the inspection area;
(4) Be clear of all obstructions, including;
a. Shelves;
b. Work benches;
c. Displays;
d. Machinery; and
e. Stairways;
(5) Be wired for electricity in accordance
with local code; and
(6) Have a
telephone line or internet connection if reporting inspections
electronically.
(b) Any anticipated alterations diminishing the condition or size of the inspection area shall be reported to the department, in writing, within 30 days prior to the alterations.
(c) The floor shall be a solid hard surface. Dirt or gravel floors shall not be allowed.
(d) Hoists and lifts shall be permitted in the inspection area if the equipment does not interfere with vehicle inspections.
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
