New Hampshire Code of Administrative Rules
Saf - Department of Safety
Subtitle Saf-C - Commissioner, Department of Safety
Chapter Saf-C 1600 - EXPLOSIVES
Part Saf-C 1614 - CONSTRUCTION OF TYPE 5 STORAGE FACILITIES
Section Saf-C 1614.02 - Doors

Universal Citation: NH Admin Rules Saf-C 1614.02

Current through Register No. 40, October 3, 2024

(a) The doors or covers thereof shall be solid wood or metal. Hinges and hasps shall be attached to the doors by welding, riveting, or bolting with the nuts on the inside of the door. They shall be installed in such a manner that the hinges and hasps cannot be removed when the doors are closed and locked.

(b) Each door shall be equipped with:

(1) Two mortise locks;

(2) Two padlocks fastened in separate hasps and staples;

(3) A combination of mortise lock and a padlock;

(4) A mortise lock that requires 2 keys to open; or

(5) A 3-point lock.

(c) Locks shall be 5-tumbler locks or its equivalent. All padlocks shall be protected with 1/4 inch steel caps constructed so as to prevent locks or hasps from being pried or sawed.

#2220, eff 12-31-82; ss by #2837, eff 8-27-84; ss by #4584, eff 3-3-89; ss by #5996, INTERIM, eff 3-3-95, EXPIRES, 7-1-95; ss by #6054, eff 7-1-95, EXPIRED: 7-1-03

New. #8116, INTERIM, eff 7-14-04, EXPIRES: 1-10-05; ss by #8231, eff 12-20-04

Disclaimer: These regulations may not be the most recent version. New Hampshire may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.